Economical PCB Mount Current Transformer

P/N: MC15-5A
15A/30mA, turns ratio 1:500
Typical load 500Ω (max.)
2 Pins Φ0.8mm, Pitch=12.7mm
Through-hole Φ5mm, bottom area 17*8.9mm
Isolating current feed-back signal in switch mode power supplies
Miniature Current Transformer
P/N: MC15-5A
15A/30mA, turns ratio 1:500
Typical load 500Ω (max.)
2 Pins Φ0.8mm, Pitch=12.7mm
Through-hole Φ5mm, bottom area 17*8.9mm
Isolating current feed-back signal in switch mode power supplies
Enamel wires are critical materials for miniature current transformers. The basic parameters of the most popular used enamel wires are introduced as below. The diameter of bare core range from 0.10mm to 0.31mm. For a typical mini current transformer of 10(100)A/10mA with turns ratio 1:1000, the enamel wire of Φ0.18mm is suitable. For some CT with rate current > 200A, […]
» Read moreP/N: ZS03-03B
ID≥Φ15mm, OD≤Φ36mm, H=7.3mm
High sensitivity, perfect temperature stability
Close to zero load shift and zero phase shift
Excellent balance characteristics
Small change for output voltage after passing the heavy current IDC
Various choices for different configurations and output harateristics
P/N: MC50-10A
50A/50mA, Rb=100Ω
3 Pins Φ1.0mm, Pitch=15.24mm
Through-hole=Φ9.5mm, bottom area 23.8*11.12mm
2 pins for connecting, 1 pin for mechanical support