Front 2-Pin Tiny Current Transformer
P/N: MC10-10B
5(10)A/5mA, Rb=50Ω, turns ratio 1:1000
2 Pins Φ0.8mm, Pitch=12.8mm
Through-hole=Φ4mm, bottom area 9.7*17mm
Tag: 1:1000+
3-Pin Mini Current Transformer
P/N: MC50-10A
50A/50mA, Rb=100Ω
3 Pins Φ1.0mm, Pitch=15.24mm
Through-hole=Φ9.5mm, bottom area 23.8*11.12mm
2 pins for connecting, 1 pin for mechanical support
Ring Type Micro Current Transformer
P/N: MS100-10A
10(100)A/10mA, Rb=12.5Ω, turns ratio 1:1000
Max current 100A, accuracy 0.1 class
Insulation tape & heat-shrink sleeve double protected
ID Φ9mm, OD Φ29mm, H 16.5mm
Low Phase Error Current Transformer
P/N: MS12-10A
10(12)A/10mA, Rb=20Ω, turns ratio 1:1000
Primary current 0.05~12A, secondary current 0.05~12mA
Phase angle error <2' (at 10% rated current)
Insulation tape & heat-shrink sleeve double protected
ID Φ13mm, OD Φ30mm, H 17mm, lead wires shielded
Current Transformer Winding Coil
P/N: MW30-10A
1(30)A/1mA, Rb≤100Ω
0.1mm wire 1000 turns
Max current 30A, 0.5 class
ID 6.6mm, OD 14.5mm(max), height 6.5mm
4-Pin Current Transformer for PCB
P/N: MC80-10A
10(80)A/10mA, Rb=10Ω, turns ratio 1:2000
Max current 80A, accuracy 0.1 class
Holes Φ8mm, height 31mm on PCB
Pitch 20*9mm, mounting area 31*19mm
Low Voltage Current Transformer
P/N: MT100-10A, 10(100)A/10mA;
Turns ratio 1:1000, Accuracy 0.1 Class, Rb=12.5Ω
Hole: Φ10mm, OD: Φ28mm, H: 17mm
Plastic case with epoxy resin filled inside
Through-hole of Φ10 mm for primary wire
Mini Split Current Transformer
P/N: PL20-10A, 20A/16mA, Turns ratio 1:1250
Self-locked structure for reliable hanging
High linearity over a wide current range
Compact size, Φ6 mm hole for primary cable
Lead wire gauge & length specified by customers
Semi-finished Mini Current Transformer
Simple structure, winding coil wrapped by insulation tape;
P/N: MS100-10B, 5(100)A/5mA
Accuracy 0.2 Class, Rb=10Ω
Big through-hole, ID=Φ20mm, OD=Φ37mm, H=16mm
2-Pin Small Current Transformer
P/N: MC10-10E
5(10)A/5mA, accuracy 0.2 Class, Rb=50Ω
2 Pins, Pitch=12.7mm
Through-hole=Φ5mm
Mounting area 16.6*9.2mm